Floor Model Rotors
Beckman Coulter J-LITE JLA-10.500 Fixed-Angle Aluminum Rotor, 6 x 500 mL - for Avanti J and J2 series
The J-LITE JLA-10.500 rotor (Beckman Coulter part 369681) is a high-capacity fixed-angle aluminum rotor designed for large-volume separations and preparative workflows. It accepts six 500 mL biosafety liquid canisters with secondary liquid closures and is rated for 10,000 rpm (18,600 x g) for use in compatible Avanti centrifuge models.
- High-capacity 6 x 500 mL configuration for large-volume processing.
- Rated to 10,000 rpm (18,600 x g) for robust pelleting performance.
- Anodized aluminum construction for strength and corrosion resistance.
- Includes six biosafety liquid canisters with secondary liquid closures.
- Fixed-angle design for efficient sedimentation and reduced run times.
Beckman Coulter JA-17 Fixed-Angle Aluminum Rotor, 14 x 50 mL, 17,000 rpm
The Beckman Coulter JA-17 fixed-angle aluminum rotor (MPN 369691) is a high-force, large-volume rotor designed for pelleting bacteria, cell membranes, and subcellular organelles. It accepts fourteen 50 mL tubes and is rated to 17,000 rpm (39,800 x g). Available with a biosafety lid and compatible with J and J2 series centrifuge platforms.
- Capacity: 14 x 50 mL (nominal capacity 700 mL).
- Maximum speed: 17,000 rpm.
- Maximum RCF: 39,800 x g.
- Material: Anodized aluminum.
- Angle: Fixed-angle.
- Compatible with J and J2 series centrifuge platforms.
- Biosafety: Biosafety lid available.
- k-factor: 690.
- rMAX: 123 mm; rMIN: 56 mm; rAV: 90 mm.
- Compatible adapters: 342327, 357359, 357360, 357361, 357362, 870329.
Beckman Coulter JA-10 Fixed-Angle Rotor Assembly, 6 x 500 mL, 10,000 rpm
The JA-10 fixed-angle rotor is a high-volume aluminum rotor designed for processing large-volume biological samples. It accommodates six 500 mL bottles and operates up to 10,000 rpm (17,700 x g), providing efficient pelleting for tissue homogenates and other large particles.
- Holds six 500 mL bottles.
- Maximum speed 10,000 rpm (17,700 x g).
- Fixed-angle design for efficient pelleting.
- Aluminum construction.
- Includes carrying handle for transport.
- Intended for high-volume sample processing.
Beckman Coulter JA-14.50 Fixed-Angle Rotor, 16 x 50 mL, single-locking lid (B88555)
The Beckman Coulter JA-14.50 (B88555) fixed-angle rotor is engineered for high-throughput processing of 16 x 50 mL conical tubes. It delivers up to 14,000 rpm (35,100 x g) for pelleting and density gradient separations, and features a single-locking lid and lightweight construction for easier handling.
- Holds 16 x 50 mL conical tubes.
- Fixed-angle design for efficient pelleting and density gradient separations.
- Maximum speed 14,000 rpm; maximum RCF 35,100 x g.
- Single-locking lid for secure operation.
- Lightweight construction for easier handling and installation.
- Designed for use in high-speed refrigerated centrifuges.
Enterprise Technology Solutions UPS CAPACITY OF 5000VA 4000W 5
5000173452 UPS CAPACITY OF 5000VA 4000W 5
ATLANTIC BIOPHARM SOLUTIONS LLC 3/4 BIOFLEX WHITE PLST CLAMP
3/4" Bioflex White Plastic MiniTri-Clamp
INTACT GENOMICS INC Recombineering Chemically Competent Cells 6x50µl
Intact Genomics (IG™) Recombineering Chemically Competent Cells enable high-efficiency transformation for DNA, plasmid, and BAC engineering, and homologous recombination. Derived from SW102 (a DH10B background strain), they feature a defective lambda prophage and a galK deletion for efficient DNA/BAC modification via galK positive/negative selection. The cells are tetracycline resistant (5 μg/mL).
- High transformation efficiency.
- Supports DNA, plasmid, and BAC engineering, plus homologous recombination.
- Enables precise modification using galK positive/negative selection.
- Derived from SW102 (DH10B background).
- Heat-inducible prophage with red genes (exo, bet, gam), repressed at 32 °C and induced at 42 °C.
- Tetracycline resistant (TetR: 5 μg/ml).
Beckman Coulter MLA-50 Fixed-Angle Aluminum Rotor (A91774) - 6 x 32.4 mL, for Optima MAX-XP ultracentrifuges
Beckman Coulter MLA-50 Fixed-Angle Aluminum Rotor (A91774) is a high-speed, six-place fixed-angle rotor engineered for subcellular isolations and preparative ultracentrifugation. It accepts large-volume tubes and is designed for use with compatible benchtop ultracentrifuges.
- High-speed fixed-angle rotor suitable for subcellular isolations.
- Holds six 32.4 mL tubes (25 x 77 mm); nominal capacity 194.4 mL.
- Rated to 50,000 rpm for maximum centrifugal performance.
- Delivers up to 233,000 x g (max rcf).
- Constructed from aluminum for strength and durability.
- Intended for use with compatible benchtop ultracentrifuges; verify instrument compatibility before use.
MSC Akro-Mils Plastic Storage Bin, 5-3/8 in Length, 4-1/8 in Width, 10 lb Capacity
These plastic storage bins are designed for hanging and stacking. They feature heavy-duty construction and can be used with louvered racks, panels, rail racks, and louvered carts for high-density storage. The bins are corrosion-proof and unaffected by weak acids and alkalis.
- Heavy-duty construction for durability
- Stackable design for efficient space utilization
- Can be hung on racks and panels
- Corrosion-proof and resistant to weak acids and alkalis
- Hopper front provides easy access to contents
- Compatible with shelving systems
- Load capacity of 10 lb
MSC Lift-All Web Sling, 2 Ply, 6 in x 5 ft, Flat Eye
Lift-All Tuff-Edge II Polyester Web Slings are fabricated with Tuff-Edge II polyester webbing. These slings offer improved abrasion and edge cutting resistance compared to standard polyester web slings, which leads to a longer sling life, enhanced safety, and reduced overall costs.
- Eye and eye sling type with tapered flat eyes.
- Two ply polyester construction.
- Six inch width and five foot length.
- Vertical capacity of 16,500 lb.
- Choker capacity of 13,200 lb.
- Basket capacity of 33,000 lb.
- Improved abrasion and edge cutting resistance for extended sling life.
- Red Core yarn aids in the inspection process for enhanced safety.
- Maximum operating temperature up to 200°F.
- Complies with OSHA 1910.184, ASME B30.9, and WSTDA standards.